Avaya Communication Server 1000 for Avaya Aura Implementation Sample Questions:

1. A customer has a Communication Server (CS) 1000 Rls. 7x Co-Resident system with a Media Gateway Controller and Media Cards and has completed the configuration of all elements and they are all active and known to the Call Server. The customer wants to add all the elements to the Security Domain.
Which Overlay 117 commands used to add the element to the Security Domain?

A) JoinSecDomain
B) Register ucmsecurity device
C) Register ucmSecurity system
D) Join ucmSecurity element

2. Click the Exhibit button.

A technician is asked to review the existing route information for the customer.
According to the printout shown in the exhibit, type of route is this?

A) A media services route
B) An outgoing only route
C) An analog route
D) A direct inward dial route

3. Upon accessing Subscriber Manager, you discover that the Subscriber Manager database does not accurately reflect all the telephones managed under the Subscriber Manager database.
Which Subscriber Manager operation is required to update the Subscriber Manager database with the communication Server 1000 telephones?

A) CSV Subscriber Synchronization
B) LDAP Synchronization
C) Publish Accounts
D) Account Synchronization

4. A technician has deployed a Communication Server 1000 Rls. 7x system at their site. You are using the Virtual Terminal to access Communication Command line interface (CLI) to add telephone.
Which Overlays (LDs) are linked to eliminate the need for existing one Overlay (LD) and entering another one?

A) LD 10, 11, 15 and 20
B) LD 20 and 32
C) LD 10, 11, 20 and 32
D) LD 10, 11, 20 and 30

5. A field calls about a problem enabling the DSPs on a new Communication Server (CS) 1000E SA Co-resident on release 7x. The DSPs on the MG 1 are all enabled but enabling the DSPs on MG2 and MG3 fail, and asked that the configuration be reviewed.
MG1: CPMG 128
MG2: MGC 128 DSP DB in position 2
MG3: MGC 128 DSP DB in position 2
After reviewing the configuration, an error in the DSP 128 VGW (DSP) configuration is identified?
Which configuration option accurately reflects the proper configuration for the voice Gateway (DSP) channel?

A) Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 11 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
B) Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 00 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
C) Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 01 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00
D) Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 02 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00

Solutions: