2026 Realistic NS0-164 Dumps Questions To Gain Brilliant Result
Start your NS0-164 Exam Questions Preparation with Updated 263 Questions
NEW QUESTION # 143
Which one of the following actions will cause a currently in sync snapmirror relationship to fall out of sync?
- A. Modifying the /etc/snapmirror.conf file on the destination storage appliance
- B. Modifying the /etc/snapmirror.conf file on the source storage appliance
- C. Running snapmirror release on the source storage appliance
- D. Running snapmirror update on the source storage appliance
Answer: A
NEW QUESTION # 144
An aggregate is composed of twelve 36-Gigabyte disks. A drive fails and only 72-Gigabyte spare disks are available Data ONTAP will then perform what action?
- A. alerts you that there are no 36-Gigabyte disks and wait for one to be inserted
- B. chooses a 72-Gigabyte disk and use it as is
- C. chooses a 72-Gigabyte disk and right-size it
- D. halts after 24 hours of running in degraded mode
Answer: C
NEW QUESTION # 145
Open System SnapVault agents can be installed on all non-Network Appliance platforms.
- A. False
- B. True
Answer: A
NEW QUESTION # 146
To create a thin-provisioned LUN by using NetApp recommended practices, which configuration should you choose?
- A. a non-space-reserved LUN with thick volume provisioning.
- B. a non-space-reserved LUN with thin volume provisioning.
- C. a space-reserved LUN with thin volume provisioning.
- D. a space-reserved LUN with thick volume provisioning.
Answer: B
NEW QUESTION # 147
Which two tools can be used to actively monitor ONTAP cluster performance? (Choose two.)
- A. Active IQ OneCollect
- B. Cloud Insights
- C. Active IQ Unified Manager
- D. Cloud Sync
Answer: B,C
NEW QUESTION # 148
Which ONTAP policy type defines the kind of traffic that Is supported for a LIF?
- A. QoS
- B. Export
- C. Service
- D. Failover
Answer: C
NEW QUESTION # 149
Which ONTAP feature discards identical blocks and replaces them with references to a single shared block?
- A. Thin provisioning
- B. Deduplication
- C. Compression
- D. Compaction
Answer: B
NEW QUESTION # 150
Which two products can be used to administer Cloud Volumes ONTAP? (Choose two.)
- A. CloudCheckr
- B. Cloud Data Sense
- C. System Manager
- D. NetApp BlueXP
Answer: C,D
NEW QUESTION # 151
Data ONTAP uses inodes in an active file system to reference__________________.
- A. snapshots
- B. file segments
- C. disk blocks
- D. qtrees
Answer: C
NEW QUESTION # 152
Which workload type supports Autonomous Ransomware Protection?
- A. NAS
- B. VMFS
- C. SAN
- D. Object
Answer: A
NEW QUESTION # 153
Which NetApp solution enables block-level backup and restore from ONTAP to StorageGRID?
- A. LockVault
- B. FabricPool
- C. SnapRestore
- D. Cloud Backup
Answer: D
NEW QUESTION # 154
Which one of the following statements does not apply to Nearstore Personality?
- A. The feature is available to all NetApp storage systems
- B. Converts the destination storage system to a Nearstore system
- C. This feature requires the nearstore_option license on the destination storage system
- D. Provides increased concurrent streams when the storage systems are used as destinations for SnapMirror and SnapVault transfers
Answer: A
NEW QUESTION # 155
Identify the two SnapMirror commands that are entered on the destination storage appliance.
- A. snapmirror release
- B. snapmirror initialize
- C. options snapmirror.access on
- D. snapmirror resync
Answer: B,D
NEW QUESTION # 156
Which statement about Advanced Disk Partitioning is true?
- A. Both nodes must have a root partition assigned.
- B. Root partitions can be assigned to any node in a cluster.
- C. Both nodes must have a root partition or a data partition assigned.
- D. Data partitions can be assigned to any node in a cluster.
Answer: A
NEW QUESTION # 157
Which one of the following statements apply to the Free Space Estimator utility?
- A. This utility runs automatically after each transfer
- B. This utility must be enabled on the secondary storage system
- C. This utility determines if there is sufficient space on the secondary volume to perform a transfer
- D. This utility determines if there is sufficient disk space available on the primary to perform an OSSV transfer
Answer: D
NEW QUESTION # 158
To restore a primary SnapVault qtree to the exact qtree location on the primary storage system (from which it was backed up), you must:
- A. Add the new qtree to the primary storage system
- B. Overwrite the existing qtree on the primary storage system
- C. Restore to a non-existing qtree
- D. Delete the existing qtree from the secondary storage system
Answer: C
NEW QUESTION # 159
What are two ways that an administrator can define a new consistency group? (Choose two.)
- A. System Manager
- B. Active IQ Unified Manager
- C. SANtricity
- D. ONTAP ReST API
Answer: A,D
NEW QUESTION # 160
......
Easy Success Network Appliance NS0-164 Exam in First Try: https://examtorrent.actualtests4sure.com/NS0-164-practice-quiz.html
