L4M8 Exam Dumps Pass with Updated Jul-2023 Tests Dumps
L4M8 exam questions for practice in 2023 Updated 106 Questions
CIPS L4M8 certification exam is an excellent choice for professionals who are looking to advance their careers in the field of procurement and supply chain management. By studying for and passing L4M8 exam, individuals will gain the practical skills and knowledge that they need to succeed, and will be recognized as having the necessary expertise to work anywhere in the world.
NEW QUESTION # 13
What are the four quadrants within the Kraljic portfolio matrix?
Answer:
Explanation:
At the early stages In procurement and supply cycle, buyers begin segmenting current supplies in the categories, depending on their level of integration into the organization. To help get this done, the buyer may use the Kraljic portfolio matrix. The kraljic portfolio matrix segment suppliers into four categories, which are;
1) Routine 2) Bottleneck 3) Leverage 4)strategic supplier
NEW QUESTION # 14
What is PQQ and what does it include?
Answer:
Explanation:
Pre-qualification questionnaire (PQQ) is often standard forms that buyers send to potential suppli-ers. The purpose is to ensure that these potential suppliers could, if they win the contract, supply the product or service to the standard required. PQQ includes requesting details from the potential suppliers on the following information
1. Company Details
2. Environment policies
3. Trading history
4. Ethical policies
5. Financial information
6. Health and safety policies
7. Quality standards
8. References
9. Insurance.
NEW QUESTION # 15
KPI should be written to match which area of an organization?
Answer:
Explanation:
Key performance indicator (KPI) is another method of monitoring how a supplier is delivering on a contract.
When creating KPIs to manage suppliers and their contracts the areas monitored should be related to the organization's overall strategy that is where organization's success will be measured.
NEW QUESTION # 16
Explain why it is deemed better to use Sea freight rather than air
Answer:
Explanation:
It would be rare to find a supplier who does not emit any form of pollution. However, part of ethical and responsible sourcing is to make effort to reduce impact of population on the planets. Pollution can be factory emission, Noise, smell, Transportation Development, waste disposal. Transportation is a major cause of pollution. The carbon dioxide emitted from vehicles contributes greatly to air contamination. Yet it is better to use sea freight rather than air because it has a smaller impact on the environment.
NEW QUESTION # 17
Research the ethical standard or accreditations of an industry with which you are familiar
Answer:
Explanation:
If a supplier is accredited or is a member of an association that promotes good ethical conduct, a statement to this effect is likely to be featured on its company documentation. This could be in a form of letters after the organization name or the authorized use of logo.
Accreditation information should be verified by procurement professionals either asking organiza-tion for certification to prove membership or accreditation or checking on a professional register.
Below are associated bodies that form some industries.
1. ISO 14001 - for quality management
2. CIPS - for procurement and Supply
3. Red Tractor - NGO Registered in the UK, promoting human right
4. Amnesty International - human right
5. Carbon Trust - For Carbon neutral status.
NEW QUESTION # 18
Describe the seven stages of the Tender Process and explain the reasons why the stages must be followed.
Answer:
Explanation:
The purpose of the tendering process is to invite potential suppliers to bid to supply a product or service to the buying organization. Then buying organization select suitable suppliers, award con-tract and manage. The process is selected mostly when the need is a large or complex project or the law mandates it or it is in the company's policies to do so. The stages of the tendering process includes; Stage 1: decide which style of tender to use. There are four types of tendering used within pro-curement and this include; 1) open 2) Restricted 3) Negotiated 4) Competitive Dialogue Stage 2: Prepare invitation to tender (ITT): this stage is to prepare the document that will be made available to potential supplier. It should contain everything potential bidders will need to know to fully understand the need and to prepare and send a suitable RESPONSE it may likely in-clude; open letter, company details, overview of a project, evaluation criteria, submission date and so on.
Stage 3: send ITT: With fairness, transparency and equality, buyer will provide the documents to all potential suppliers at the same time and also provide exactly the same information/documents to all suppliers. If after receiving the ITT and some suppliers seek clarifications on anything in the documentation, buyers must give same response to identical questions to keep the process transparent and fair. Also, the response to each query to all bidders in the process.
Failure to this may result in bidders who feel disadvantaged or discriminated in any form to submit a legal challenge. Supplier submitting a Legal challenge may cause delay in the process and eventually increase administrative cost for the buyer.
Stage 4: Buying organization receives responses to the Invitation to tender from suppliers (bids). Suppliers must adhere to the bid submission dead line included in the invitation to tender document. Any bid that arrives after the deadline must be left out of the process, or else this may result to other suppliers legally challenging the process.
Stage 5: Evaluate bid. The buying organization can now evaluate the bids based on the criteria in the ITT document. It is always thorough that cross-functional team evaluates the bids to guarantee complete fairness and ensure that the chosen bid is fit for purpose. In evaluating the bids, the cross-functional team will consider the bids in the following areas; supplier organization, ethics, price, sustainability, quality, payment, disposal, service level, location, warranty and risk.
Stage 6: Award contract and give feedback hence the buying organization wards the contract to the winning supplier. This can take place by a formal communication like a letter or an e-mail.
Stage 7: Contract management. Contracts must be evaluated against the criteria in the invitation to tender.
The reasons why these stages must be followed includes;
1. Knowing the right TYPE of tender to use, reduces administration cost, for example, deciding to do restricted tendering to reduce the interest that are going to be sent in have already cut down on administrative cost.
2. The supplier can know what exactly the buyer's intentions are by developing description and the required specification.
3. To ensure that objectives of resorting to use the tendering style and the tendering process is achieved
4. To ensure that the organization generates added value by going through the stages.
5. To ensure that there are none unethical issues like fraud, bribes etc are not part of the system.
6. To ensure that the tendering process becomes transparent to all suppliers. These stages must be followed for transparency and fairness. Just like in stage 3: buyer send out the ITT to potential suppliers at the same time and providing them same information. Failure to this and bidders who feel disadvantaged or discriminated in any form may submit a legal challenge. Supplier submitting a Legal challenge may cause delay in the process and eventually increase administrative cost for the buyer.
NEW QUESTION # 19
The supplier is responsible for delivering the goods to a named port or destination (such as an air-port or warehouse), as well as unloading them from the terminal from this point, risk passes to the buyer.
- A. DP - Delivery Duty Paid
- B. DAP - Delivered At Place
- C. FAS - Free Alongside Ship
- D. DAT - Delivered At Terminal
Answer: D
NEW QUESTION # 20
Describe five types of contract terms that a procurement professional should create with a supplier when forming an agreement.
Answer:
Explanation:
Terms are the right and duties agreed which are then documented in a contract. Five types of con-tract terms that a procurement professional should create with a supplier when forming an agree-ment includes; Price term is when the buying organization wants to protect its budged and spending, it include price terms in the contract, for the buyer to buy goods or services in response to a need they some-time enshrine a bespoke specification in the contract.
Payment Term is to specify when and how the buyer will pay the supplier. The buyer may include a payment term in the contract.
Warrantee is when the buyer requires a promise from the supplier that the product or service will meet the specified need in the contract.
Time is of the essence term is included in the contract to detail when a product or service should be delivered and explains the potential losses of business if time is not observed.
NEW QUESTION # 21
What are the four stages of decommissioning?
Answer:
Explanation:
When a fixed asset reaches the end of its life, it requires decommissioning before reconditioning or disposal.
Decommissioning is to observe all the safety measures and technical procedures and stop active machinery or an asset from operation (example gas plan, generator, transformer etc.
Decommissioning process include the following aspect
1) Preparation: Plan the process
2) Dismantle: Take the asset apart and remove hazardous waste
3) Processing: make safe any hazardous waste
4) Disposal: Ensure paper work is received to confirm removal and disposal
NEW QUESTION # 22
What happens in the public sector, regarding providing feedback?
Answer:
Explanation:
A sector is an area of an industry, e.g., private, public or third sector.
A public sector is a sector of the economy that is owned, finance and run by the government. This sector is financed with tax payer's money. And therefore owe the general public an ethical explanation towards all investment and decision.
Once the supplier that is awarded the contract has accepted, the buyer can tell the unsuccessful bidders. This usually happens through email or letter. The public sector is more likely to give feedback to unsuccessful bidders and also have to respond to any stakeholders that request information on why a supplier is not successful.
NEW QUESTION # 23
Use the balance sheet below to work out the correct ratio for coffee Time and explain whether the company appears to have enough assets to cover it liability.
Answer:
Explanation:
A current ratio of 1 shows that the organization has enough assets to repay (cover) it liability Buyers can be encouraged to deal with these suppliers after if they considered proven and strong in other areas.
Refer to the question column for response
NEW QUESTION # 24
Describe three types of fraud that could occur within the supply chain of an organization with which you are familiar.
Answer:
Explanation:
Fraud occurs when a person acts deliberately to secure monies from another party through dishonest method. Within the supply chain of an organization, fraud can represent itself in the following ways:
1. Kickbacks: e.g. (commission given to a bribe taker for service perform)
2. Corrupt influence (e.g ordering more than what is required)
3. Collusion: (group of suppliers working together to submit multiple bids and split profit.
4. Bid Rigging (a contract is informally agreed with a chosen supplier prior to the official process
5. invoicing fraud
6. Substitution (submitting products that are below the required quality
7. False claims (files false document)
Case Study
A series of news stories reporting events such as the collapse of the Rana Plaza building in 2013 have drawn attention to the poor conditions in garment factories across India and South East Asi a. Human rights groups have long be critical of the excessive hours and poor wages workers are forced to endure, as well as the abuse they receive from supervisor. With consumers becoming increasingly aware of these conditions, more pressure is being put on global brands and retailers to ensure their supply chains are fair and ethical.
Certain areas have been notorious for the mistreatment of workers. In India's textile valley', young women are been bound into contracts where they work for two to three years, in exchange for a lump sum of money that they can then put towards a dowry. This is known as the 'Sumangali [a married woman] Thittam' scheme. These women are forced to live in hostels under restrictions that prevent them from moving, and are denied the opportunity to improve their living conditions. Retailers including Walmart and H&M are known to source garments from factories in the 'textile valley'.
Reports by organizations including the Asia Floor Wage Alliance (AFWA), Central Combodia, Global Labor Justice, Sedane Labour Resource Centre (LIPS) Indonesia, and Society for Labour and Development (SLD) India have exposed unethically run factories that supply garments to H&M, Gap and Walmart. However, retailers will continue to benefit from expensive labour until mounting customers pressure causes them to change.
NEW QUESTION # 25
Research the values and ethical code of practice of an organization with which you are familiar.
Answer:
Explanation:
Fullpower projects is a training firm that trains on project management and procurement. It has the following values and ethical code of practice
1) Accountability
2) selflessness
3) openness
4) integrity
5) objectives
6) Honesty
7) Leadership
NEW QUESTION # 26
What topics are covered within ethics?
Answer:
Explanation:
Topics that are covered within ethics are;
1. Environmental factors
2. The triple bottom line: profit, people and planet
3. Adopting sustainable practice.
4. considering the social impact of organization's behaviors
NEW QUESTION # 27
Which Incoterm applies here?
The supplier is responsible for delivering the goods directly onto the vessel that will transport them to their named destination, covering the cost of both the transport and the insurance to cover this. Again, the supplier bears all risks until the goods are delivered to the buyer at their named place.
- A. DAP - Cost and Freight
- B. CIF - Cost Insurance and Freight
- C. FOB - Free On Board
- D. FAS - Free Alongside Ship
Answer: B
NEW QUESTION # 28
Which contract term contains details of when a product or service should be delivered and ex-plained the potential loss of business?
Answer:
Explanation:
Contract terms are the right and duties agreed between parties with which are then documented in contract. Terms can be either implied or expression.
Implied terms are always present in a contract and are set by national laws; like the sales of goods act, whereas express terms are negotiated and created, for example; time is of the essence. When the procurement professional is setting key performance indicators, where which the supplier's performance will be monitored and managed, the KPI is expected to be SMART. The SMART is an acronym that is used to set KPI and specification. It means:
Specific
Measurable
Achievable
Relevant
Time bound
NEW QUESTION # 29
What Incoterm applies here?
The goods are considered 'delivered' at the point of release from the supplier's premises or another name place. The supplier is not responsible for loading or transporting the goods and does not have to arrange export clearance - this must be arranged by the buyer. The risk is on the buyer from this point.
a) EXW - Ex Works
b) FCA - Free Career
c) CPT - Carriage Paid To
d) CIP - Carriage and Insurance Paid to
- A. EXW - Ex Works
- B. FCA - Free Career
- C. CPT - Carriage Paid To
- D. CIP - Carriage and Insurance Paid to
Answer: A
NEW QUESTION # 30
What are the reasons that a contract can legally be terminated?
Answer:
Explanation:
A contract is written or verbal agreement, made between two or more parties that are legally en-forceable. For a contract to be legally binding it must include intention of parties entering into the contracts. All parties must have the capacity to contract or be contracted. They must be of a sound mind, there should be a promise (offer) for performance from the other party and an exchange (consideration) of one thing for another within an agreement for contract to be binding, there must be an acceptance of the offeror's offer by the offeree.
There are many reasons contract can legally be terminated, including non-performance by one or both parties, a significant change in the requirement.
There are several reasons contract can legally be terminated, including non-performance by one or both parties; breach of material, failure to meet service level agreement, ethical breaches, a significant change in the requirement of either party caused by ethical change in the market, change in Demand, obsolescence, contract completion. The procurement professionals should get an exit strategy that should encourage a stress free disengagement should incase there are no profitable reason to continue with the contract.
NEW QUESTION # 31
Describe a current or recent trade war of which you are aware and explain the implication it has for world trade.
Answer:
Explanation:
Trade war is an economic conflict where countries make it difficult for global trading to happen. Trade wars can make importing products to a country very expensive. A recent example is the US-China trade war; prices were raised on us-built vehicles exported to China. This affected consumer the most as there was an upshot of price.
NEW QUESTION # 32
......
CIPS L4M8 Certification Exam covers a wide range of topics related to procurement and supply, including procurement processes, supplier evaluation and selection, contract management, negotiation, and risk management. L4M8 exam is designed to test the candidate's knowledge and understanding of the key principles and concepts of procurement and supply, as well as their ability to apply this knowledge in practical situations.
Authentic L4M8 Dumps With 100% Passing Rate Practice Tests Dumps: https://examtorrent.actualtests4sure.com/L4M8-practice-quiz.html
