NCSE-Core Exam Dumps, NCSE-Core Practice Test Questions
PDF (New 2023) Actual Nutanix NCSE-Core Exam Questions
The Nutanix NCSE-Core (Nutanix Certified Systems Engineer-Core) certification exam is a comprehensive assessment designed to test and validate the skills and knowledge of IT professionals in deploying, administering, and troubleshooting Nutanix solutions. The NCSE-Core exam is intended for experienced systems engineers, architects, and consultants who work with Nutanix technology on a regular basis.
NEW QUESTION # 85
From Which page on portal.nutanix.com can an open case be directly escalated?
- A. Case Detail
- B. 360 View
- C. Home
- D. View Cases
Answer: D
NEW QUESTION # 86
A prospect is concerned about the suitability and design of using Nutanix for an upcoming Avaya IP Office migration.
Which type of document should the SE provide?
- A. Knowledge Base Article
- B. Reference Architecture
- C. Best Practice Guide
- D. Filed Advisory
Answer: B
NEW QUESTION # 87
A customer is evaluating Nutanix to replace their existing 200TB filer. The filer is used to store archived images. To achieve maximum storage density. RF2 and Erasure Coding are proposed. What is the minimum number of nodes required to support the maximum Erasure Coding stripe size of 4/1 (data/parity)?
- A. 7 Nodes
- B. 5 Nodes
- C. 6 Nodes
- D. 4 Nodes
Answer: D
NEW QUESTION # 88
A systems engineer providers a demo to a prospective customer who wants to be more hands on with Nutanix. Which two resources can the customer leverage without support from a systems engineer or Nutanix (Choose two)
- A. Foundation
- B. Test Drive
- C. Community Edition (CE)
- D. Hosted POC(HPOC)
Answer: B,C
NEW QUESTION # 89
A systems engineer needs to size a new project that requires offsite backup using Vertam The prospect requires an RPO GE 24 hours, and the ability to restore from the past 7 days of backups The prospects data change rate is 1% How should the SE configure Sizer for this scenario?
- A. B
- B. C
- C. D
- D. A
Answer: B
Explanation:
Explanation/Reference:
Yes / Mine / Veeam
NEW QUESTION # 90
Refer to Exhibit.
When entering a Raw Input workload into Sizer, what amount of RAM should be used for the entire workload?
- A. 64GB
- B. 42GB
- C. 32GB
- D. 48GB
Answer: C
NEW QUESTION # 91
A systems engineer sizers an environment based on the customer's requirement of N+2 resiliency for the entire cluster. In which two ways could the configuration be changed to meet the customer's requirements ? (Choose Two)
- A. Increase the CPU capacity per Node
- B. Increase the RAM capacity per Node
- C. Increase the SSD capacity per Node
- D. Increase the number of Nodes
Answer: B,D
NEW QUESTION # 92
Write I/O that is deemed sequential will enter which component of the Distributed Storage Fabric first?
- A. Metadata Ring
- B. Oplog
- C. Cache
- D. Extent store
Answer: D
NEW QUESTION # 93
Refer to Exhibit.
A systems engineer is creating a configuration in Sizer for a customer that is building an app for use as an eBooks repository the app requires the following two workloads:
1. 50 generic web server VMs, each with 2 vCPUs on a 4:1 vCPU ratio, 8 GB of RAM, and 100GB of storage each
2. A fileserver workload with 80TB of usable storage available, which contains mostly PDF's and pre- compressed data.
Any reduction in performance of the web servers must be avoided. After entering the workload with default options, the Sizer outputs the configuration shown in the exhibit.
Which adjustment does the systems engineer need to make to the scenario to meet the performance requirements?
- A. increase the RAM of the web server workload to 10 GB per VM.
- B. increase the vCPU:CPU ratio of the Webserver workload to 6:1
- C. Switch to manual sizing and increase the RAM of the node configuration to 384 GB
- D. Switch to manual and change the CPUs of the node configuration to a dual 10 core model
Answer: C
NEW QUESTION # 94
Using the Sizing Option shown, which two configurations are possible configurations that Sizer could provide in Automatic mode? (Choose two) ????
- A. 3x NX-3060-G7 (2x 1920GB SSDs per node) + 3x NX-10755-G7 (4x 3.84TB SSDs per node)
- B. 6x NX-8055-G7 (2 x 7.68TB SSD + 10x 6TB HDD per node)
- C. 6x NX-3060-G7 (6x 1920GB SSDs per node)
- D. 4x NX-1075S-G7 (4x 3.85TB SSDs per node) + 4x NX-8035-G7 (6x 3.84TB SSD per node)
Answer: A,C
NEW QUESTION # 95
Based on their current workload, a customer requests the systems engineer to create a solution that does not exceed 80% CPU utilization when a node is placed in maintenance mock (N+0) When creating the Sizer Scenario in Automatic Mode. how can the systems engineer accomplish this?
- A. Customize the CPU threshold in the scenarios sizing options
- B. Modify the solution by adding compute only nodes to the cluster.
- C. Select a higher-end processor when defining the workload.
- D. Use Caostmize to increase the CPU Core count until the CPU utilization is 80%
Answer: A
NEW QUESTION # 96
A systems engineer sizes an environment based on the customer's requirement of N+2 resiliency for the entire cluster.
In which two way could the configuration be changed to meet the customer's requirements' (Choose two)
- A. Increase the CPU capacity per Node
- B. Increase the RAM capacity per Node
- C. Increase the SSD capacity per Node
- D. Increase the number of Nodes
Answer: B,D
NEW QUESTION # 97
A VDI environment based on AHV Cluster is not performing well. The current environment is using only one bridge (BridgeO). An administrator need to verify if nodes are using all network card associated to BridgeO. Which two menus should be used to check the current configuration? (Choose two.)
- A. Host view in Network menu
- B. Network Configuration item in Setting menu
- C. Host NICs tab in Hardware menu
- D. 1.0 Metrics tab VM menu
Answer: A,D
NEW QUESTION # 98
During a meeting with a fortune 100 prospect, an SE achieves technical buy-in from the architecture team. The prospect shares that their management recently attended an executive briefing with Cisco and was impressed by the vision presented.
Management is pushing the arching the architecture tea to adopt Cisco as their HCI standard based on a beief that Nutanix is not a major player.
Which resource should an SE highlight?
- A. ESG Performance Analysis
- B. Net Promoter Score
- C. Reference architectures
- D. Garther magic Quadrant
Answer: D
NEW QUESTION # 99
During a sales motion with a new prospect, the prospect and SE agree to evaluate Nutanix and a computing platform using XRay.
The prospect is currently using 3-tier architecture and considering Nutanix and HPE Simplivity.
Which two details must be discussed with the prospect before the POC starts? (Choose two)
- A. ldentify appropriate POC hardware
- B. A test plan with agreed upon success criteria
- C. Model of Fibre Channel switch
- D. What type of external storage will be connected
- E. Gather details of customer's existing 3-tier hardware
Answer: A,B
NEW QUESTION # 100
An existing customer wants to upgrade their non MW hypervisor to the most recent version The customer needs to confirm thee the hypervesor is supported on their AOS version.
Where on the Support Portal is this information located?
- A. Upgrade Paths
- B. Compauboty matrix
- C. EOL information
- D. Field Advisories
Answer: B
NEW QUESTION # 101
When creating a multi-cluster scenario in Sizer, what does the Summary Failover Capacity indicator (N+0, N+1) display?
- A. N+0, if the RAM utilization for all cluster in the scenario.
- B. N+0, if the CPU utilization for all clusters falls below N+1 resiliency.
- C. The indicator shows the best resiliency level of any cluster in the scenario
- D. The indicator shows the worst resiliency level of any cluster in the scenario
Answer: C
NEW QUESTION # 102
Which two items are considered by Sizer when calculating the required cluster resources with only the Raw Input workload type for multi-VM workload? (Choose two)
- A. Large VM NUMA requirements
- B. The vCPU:pCore ratio applied for specific VMs
- C. The required RAM for the CVM
- D. The vCPU:pCore ratio applied to all VMs.
Answer: C,D
NEW QUESTION # 103
An SE is in the discovery phase with a new customer. The customer is frustrated with the lack of transparency into their environment with the current monitoring tools. The customer has difficulty correlating the degradation of the end user experience with point-in-time events.
Which Prism feature should the SE demonstrate to show relevant value?
- A. Event tab on the Alerts page
- B. A specific virtual machine's virtual disk Additional Stats
- C. A specific virtual machine's Performance Summary
- D. Analysis page with custom charts and event reporting
Answer: D
NEW QUESTION # 104
......
Nutanix NCSE-Core (Nutanix Certified Systems Engineer-Core) is a certification exam that is designed to test the skills and knowledge of IT professionals in the field of hyperconverged infrastructure. The exam is aimed at professionals who have experience in deploying, managing, and troubleshooting Nutanix solutions.
Updated Jun-2023 Pass NCSE-Core Exam - Real Practice Test Questions: https://examtorrent.actualtests4sure.com/NCSE-Core-practice-quiz.html
