Real NSE7_OTS-6.4 are Uploaded by Actualtests4sure provide 2023 Latest NSE7_OTS-6.4 Practice Tests Dumps.
All NSE7_OTS-6.4 Dumps and Fortinet NSE 7 - OT Security 6.4 Training Courses Help candidates to study and pass the Fortinet NSE 7 - OT Security 6.4 Exams hassle-free!
NEW QUESTION # 18
What can be assigned using network access control policies?
- A. Logical networks
- B. Layer 3 polling intervals
- C. FortiNAC device polling methods
- D. Profiling rules
Answer: A
NEW QUESTION # 19
An OT administrator configured and ran a default application risk and control report in FortiAnalyzer to learn more about the key application crossing the network. However, the report output is empty despite the fact that some related real-time and historical logs are visible in the FortiAnalyzer.
What are two possible reasons why the report output was empty? (Choose two.)
- A. The administrator selected the wrong time period for the report.
- B. The administrator selected the wrong logs to be indexed in FortiAnalyzer.
- C. The administrator selected the wrong devices in the Devices section.
- D. The administrator selected the wrong hcache table for the report.
Answer: A,D
NEW QUESTION # 20
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must register the same FortiToken on more than one FortiGate.
- B. You must use a third-party RADIUS OTP server.
- C. You must use a FortiAuthenticator.
- D. You must use the user self-registration server.
Answer: C
NEW QUESTION # 21
Refer to the exhibit, which shows a non-protected OT environment.
An administrator needs to implement proper protection on the OT network.
Which three steps should an administrator take to protect the OT network? (Choose three.)
- A. Configure firewall policies with industrial protocol sensors
- B. Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.
- C. Configure firewall policies with web filter to protect the different ICS networks.
- D. Use segmentation
- E. Deploy a FortiGate device within each ICS network.
Answer: A,B,C
NEW QUESTION # 22
Refer to the exhibit.
Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)
- A. FortiGate-3 and FortiGate-4 devices must be in a transparent mode.
- B. IT and OT networks are separated by segmentation.
- C. Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.
- D. Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.
Answer: A,B
NEW QUESTION # 23
An OT administrator has configured FSSO and local firewall authentication. A user who is part of a user group is not prompted from credentials during authentication.
What is a possible reason?
- A. Two-factor authentication is not configured with RADIUS authentication method
- B. FortiNAC determined the user by DHCP fingerprint method
- C. The user was determined by Security Fabric
- D. FortiGate determined the user by passive authentication
Answer: B
NEW QUESTION # 24
What two advantages does FortiNAC provide in the OT network? (Choose two.)
- A. It can be used for device profiling.
- B. It can be used for network micro-segmentation.
- C. It can be used for industrial intrusion detection and prevention.
- D. It can be used for IoT device detection.
Answer: A,B
NEW QUESTION # 25
Which three common breach points can be found in a typical OT environment? (Choose three.)
- A. Hard hat
- B. VLAN exploits
- C. Global hat
- D. Black hat
- E. RTU exploits
Answer: A,D,E
NEW QUESTION # 26
An administrator wants to use FortiSoC and SOAR features on a FortiAnalyzer device to detect and block any unauthorized access to FortiGate devices in an OT network.
Which two statements about FortiSoC and SOAR features on FortiAnalyzer are true? (Choose two.)
- A. You can automate SOC tasks through playbooks.
- B. Each playbook can include multiple triggers.
- C. You cannot use Windows and Linux hosts security events with FortiSoC.
- D. You must set correct operator in event handler to trigger an event.
Answer: A,D
Explanation:
Ref: https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/268882/fortisoc
NEW QUESTION # 27
Refer to the exhibit.
Which statement about the interfaces shown in the exhibit is true?
- A. port1, port1-vlan10, and port1-vlan1 are in different broadcast domains
- B. port1-vlan10 and port2-vlan10 are part of the same broadcast domain
- C. port2, port2-vlan10, and port2-vlan1 are part of the software switch interface.
- D. The VLAN ID of port1-vlan1 can be changed to the VLAN ID 10.
Answer: A
NEW QUESTION # 28
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Direct VLAN assignment
- B. Enhanced point of connection details
- C. Adapter consolidation for multi-adapter hosts
- D. Importation and classification of hosts
Answer: B,D
Explanation:
The two benefits of a Nozomi integration with FortiNAC are enhanced point of connection details and importation and classification of hosts. Enhanced point of connection details allows for the identification and separation of traffic from multiple points of connection, such as Wi-Fi, wired, cellular, and VPN. Importation and classification of hosts allows for the automated importing and classification of host and device information into FortiNAC. This allows for better visibility and control of the network.
NEW QUESTION # 29
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic? (Choose three.)
- A. Services defined in the firewall policy.
- B. Destination defined as internet services in the firewall policy
- C. Source defined as internet services in the firewall policy
- D. Highest to lowest priority defined in the firewall policy
- E. Lowest to highest policy ID number
Answer: A,B,D
Explanation:
The three criteria that a FortiGate device can use to look for a matching firewall policy to process traffic are:
1. Services defined in the firewall policy - FortiGate devices can match firewall policies based on the services defined in the policy, such as HTTP, FTP, or DNS.
2. Destination defined as internet services in the firewall policy - FortiGate devices can also match firewall policies based on the destination of the traffic, including destination IP address, interface, or internet services.
3. Highest to lowest priority defined in the firewall policy - FortiGate devices can prioritize firewall policies based on the priority defined in the policy. The device will process traffic against the policy with the highest priority first and move down the list until it finds a matching policy.
Reference:
Fortinet NSE 7 - Enterprise Firewall 6.4 Study Guide, Chapter 4: Policy Implementation, page 4-18.
NEW QUESTION # 30
Refer to the exhibit and analyze the output.
Which statement about the output is true?
- A. This is a sample of a FortiAnalyzer system interface event log.
- B. This is a sample of an SNMP temperature control event log.
- C. This is a sample of a PAM event type.
- D. This is a sample of FortiGate interface statistics.
Answer: A
NEW QUESTION # 31
An OT administrator has configured FSSO and local firewall authentication. A user who is part of a user group is not prompted from credentials during authentication.
What is a possible reason?
- A. FortiGate determined the user by passive authentication
- B. Two-factor authentication is not configured with RADIUS authentication method
- C. The user was determined by Security Fabric
- D. FortiNAC determined the user by DHCP fingerprint method
Answer: A
NEW QUESTION # 32
An OT supervisor needs to protect their network by implementing security with an industrial signature database on the FortiGate device.
Which statement about the industrial signature database on FortiGate is true?
- A. An administrator must create their own database using custom signatures.
- B. By default, the industrial database is enabled.
- C. A supervisor must purchase an industrial signature database and import it to the FortiGate.
- D. A supervisor can enable it through the FortiGate CLI.
Answer: D
NEW QUESTION # 33
When you create a user or host profile, which three criteria can you use? (Choose three.)
- A. Host or user attributes
- B. Location
- C. An existing access control policy
- D. Host or user group memberships
- E. Administrative group membership
Answer: A,B,D
Explanation:
https://docs.fortinet.com/document/fortinac/9.2.0/administration-guide/15797/user-host-profiles
NEW QUESTION # 34
Refer to the exhibit.
An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?
- A. A FortiSIEM CMDB report
- B. A FortiAnalyzer device report
- C. A FortiSIEM incident report
- D. A FortiSIEM analytics report
Answer: A
NEW QUESTION # 35
......
Valid Way To Pass Fortinet's NSE7_OTS-6.4 Exam with : https://examtorrent.actualtests4sure.com/NSE7_OTS-6.4-practice-quiz.html
